Decorative Skeleton Bone Table
Tools and Materials
•Coping saw
•4 faux bone legs
•4 double-threaded screws
•Epoxy
•Drill (with 1/2-inch bit)
•1 precut 1-inch-thick round or oval piece of wood (ours is 18-by-28-inch medium-density fiberboard)
•Double-threaded wood-screw studs, steel, 3/16” by 3”
•Wood putty and putty knife
•Sandpaper
•Paint to match the color of the bones
Decorative Bone Table How-To:
1.Trim the thigh bones: Use saw to cut legs to 1 inch less than the desired table height (to account for tabletop).
2.Stabilize the knees: Take 1 leg apart at the knee; unscrew the hardware, and remove the kneecap. Connect shin bone to thighbone with 1 double-threaded screw. Repeat with the remaining legs.
3.Stabilize the ankles: Position 1 foot so it rests flat on the floor, and generously squeeze epoxy into the hinge that makes the ankle flex. Repeat with remaining legs. Let dry and cure at least overnight.
4.Attach legs to the table: Decide where you want the legs, and drill pilot holes through tabletop. Place leg underneath pilot hole, then screw to attach. Repeat with remaining legs.
5.Put putty over screws, and let dry. Sand until smooth.
6.Paint tabletop.
(via nikkinecromantic)
i got this tattoo for various reasons. it is not finished as yet.
Im a buddhist… hence the buddha, I design tattoos for people and have a strong respect for the pioneers of the ‘sailor jerry’ style tattoo so thats explains the blue ink and older style mini tats.
The bandana and the Hug life are a vague reference to tupac ad his epicness to the maxx.
i guess what im saying is just try to enjoy your life and if you want to get covered in tattoos, thats cool… hug life.
word
(via ethanmarek)
